SB Acoustics SB26STAC-C000-4
Features
- Cast aluminium faceplate
- Copper cap for reduced voice coil inductance and minimum phase shift
- Non-reflective rear chamber with optimized damping for improved dynamics
- Flow optimized vented pole piece for optimum coupling to rear chamber
- Fine weave soft fabric dome for smooth frequency response
- Saturation controlled motor system for low distortion
- CCAW voice coil for low moving mass
- Long life silver lead wires
- Low resonance frequency
Specs
- Nominal Impedance 4 Ω
- DC resistance, Re 3.2 Ω
- Voice coil inductance, Le 0.4 mH
- Effective piston area, Sd 6.2 cm2
- Voice coil diameter 25.4 mm
- Voice coil height 1.3 mm
- Air gap height 2.5 mm
- Linear coil travel (p-p) 1.2 mm
- Moving mass incl. air, Mms 0.3 g
- Free air resonance, Fs 750 Hz
- Sensitivity (2.83 V / 1 m) 91.5 dB
- Mechanical Q-factor, Qms 3.0
- Electrical Q-factor, Qes 1.78
- Total Q-factor, Qts 1.12
- Force factor, Bl 1.6 Tm
- Rated power handling* 120 W
- Magnetic flux density 1.15 T
- Magnet weight 0.22 kg
- Net weight 0.53 kg
* IEC 268-5, high-pass Butterworth, 2600 Hz, 12 dB/oct.
