SB Acoustics SB15CRC30-4
SB Acoustics SB15CRC30-4
SB Acoustics SB15CRC30-4
Preview: SB Acoustics SB15CRC30-4
Preview: SB Acoustics SB15CRC30-4
Preview: SB Acoustics SB15CRC30-4
SB Acoustics SB15CRC30-4
SB Acoustics SB15CRC30-4
SB Acoustics SB15CRC30-4
SB Acoustics SB15CRC30-4
Mobile Preview: SB Acoustics SB15CRC30-4
Mobile Preview: SB Acoustics SB15CRC30-4
Mobile Preview: SB Acoustics SB15CRC30-4
TOP
-20%

SB Acoustics SB15CRC30-4

Product No.:
1382551
14 Tage 14 Tage (abroad may vary)
RRP 102,36 EUR
Only 81,89 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

SB Acoustics SB15CRC30-4

Features

  • Rohacell®/Carbon fibre sandwich cone for optimized stiffness/damping ratio
  • Vented cast aluminum chassis for optimum strength and low compression
  • Low damping rubber surround for improved transient response
  • Non-conducting fibre glass voice coil former for minimum damping
  • Extended copper sleeve on pole piece for low inductance and low distortion
  • CCAW voice coil for reduced moving mass
  • Long life silver lead wires
  • Vented pole piece for reduced compression

    Specs

  • Nominal Impedance 4 Ω
  • DC resistance, Re 3.1 Ω
  • Voice coil inductance, Le 0.12 mH
  • Effective piston area, Sd 82 cm2
  • Voice coil diameter 30.5 mm
  • Voice coil height 16 mm
  • Air gap height 5 mm
  • Linear coil travel (p-p) 11 mm
  • Magnetic flux density 1.0 T
  • Magnet weight 0.54 kg
  • Net weight 1.46 kg
  • Free air resonance, Fs 37 Hz
  • Sensitivity (2.83 V / 1 m) 88.5 dB
  • Mechanical Q-factor, Qms 3.39
  • Electrical Q-factor, Qes 0.36
  • Total Q-factor, Qts 0.32
  • Moving mass incl. air, Mms 10.2 g
  • Force factor, Bl 4.55 Tm
  • Equivalent volume, VAS 17.3 liters
  • Compliance, Cms 1.81 mm/N
  • Mechanical loss, Rms 0.7 kg/s
  • Rated power handling* 50 W

* IEC 268-5, T/S parameters measured on drive units that are broken in.

Customer reviews

Unfortunately there are no review yet. Be the first who rate this product.