SB Acoustics SB29SWNRX-S75-6
SB Acoustics SB29SWNRX-S75-6
SB Acoustics SB29SWNRX-S75-6
Preview: SB Acoustics SB29SWNRX-S75-6
Preview: SB Acoustics SB29SWNRX-S75-6
Preview: SB Acoustics SB29SWNRX-S75-6
SB Acoustics SB29SWNRX-S75-6
SB Acoustics SB29SWNRX-S75-6
SB Acoustics SB29SWNRX-S75-6
SB Acoustics SB29SWNRX-S75-6
Mobile Preview: SB Acoustics SB29SWNRX-S75-6
Mobile Preview: SB Acoustics SB29SWNRX-S75-6
Mobile Preview: SB Acoustics SB29SWNRX-S75-6
TOP
-20%

SB Acoustics SB29SWNRX-S75-6

Product No.:
1382346
Short stock. Pre-order. Short stock. Pre-order. (abroad may vary)
RRP 189,00 EUR
Only 151,20 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

SB Acoustics SB29SWNRX-S75-6

Features

  • Hard paper cone for improved piston operation (made in-house)
  • Vented pole piece for minimum compression
  • Vented cast aluminium chassis for optimum strength and low compression
  • 3″ copper voice coil (4-layer) for improved power handling
  • Long life silver lead wires
  • Low damping medium hardness rubber surround for improved linearity and power handling
  • Non-conducting fibre glass voice coil former for minimum damping

Specs

  • Nominal Impedance 6 Ω
  • DC resistance, Re 4.5 Ω
  • Voice coil inductance, Le 3.0 mH
  • Effective piston area, Sd 312 cm2
  • Voice coil diameter 75.6 mm
  • Voice coil height 28.5 mm
  • Air gap height 6 mm
  • Linear coil travel (p-p) 22 mm
  • Magnetic flux density 0.63 T
  • Magnet weight 2.1 kg
  • Net weight 5.38 kg
  • Free air resonance, Fs 20 Hz
  • Sensitivity (2.83V/1m) 86 dB
  • Mechanical Q-factor, Qms 4.5
  • Electrical Q-factor, Qes 0.31
  • Total Q-factor, Qts 0.29
  • Moving mass incl. air,Mms 132 g
  • Force factor, Bl 15.4 Tm
  • Equivalent volume, Vas 66 liters
  • Compliance, Cms 0.48 mm/N
  • Mechanical loss, Rms 3.7 kg/s
  • Rated power handling* 200 W

* IEC 268-5, T/S parameters measured on drive units that are broken in.

Customer reviews

Unfortunately there are no review yet. Be the first who rate this product.